10
2022
-
05
How to choose hotel furniture from a professional hotel furniture factory?
Different professional hotel furniture factories use different surface materials for their hotel furniture. For example, the legs of tables, chairs, and cabinets require the use of hard miscellaneous wood, which is relatively strong and can withstand loads, while other materials can be used for the interior; the thickness of the coat legs must reach 2.5cm.
Different Professional hotel furniture factory Hotel furniture from different professional factories have different surface materials. For example, the legs of tables, chairs, and cabinets require the use of hard hardwood, which is stronger and can withstand loads, while the internal materials can use other materials; the thickness of the coat legs needs to reach 2.5cm. If it is too thick, it will appear clumsy, and if it is too thin, it is easy to bend and deform; kitchen and bathroom cabinets should not use fiberboard, but plywood, because fiberboard will expand and damage when it encounters water; the dining table should be washable.
If wormholes and bubbles are found in the wood, it indicates that the drying is incomplete. It is recommended that after checking the surface, the cabinet doors and drawer doors should also be opened to check whether the internal materials are rotten. You can pinch it with your nails. If you pinch it in, it means that the material inside has rotted. After opening the cabinet door, smell it with your nose. If you flush your nose, stare, and cry, it means that the formaldehyde content in the adhesive is too high and harmful to the human body.
1. Moisture content
Professional hotel furniture factory The moisture content of hotel furniture should not exceed 12%. If the moisture content is high, the wood is easy to bend and deform. Ordinary consumers do not have testing instruments when purchasing. They can touch the bottom of the hotel furniture or places without paint. If they feel damp, the moisture content is at least more than 50%, and it cannot be used at all. Some people suggest that you can sprinkle some water in places without paint. If the bleeding is slow or not slow, it indicates that the moisture content is high.
2. Furniture structure
Small hotel furniture, such as chairs, stools, and clothes racks, can be dragged to the cement floor and gently dropped. The sound is crisp, indicating good quality; if the sound is hoarse and there is a splitting noise, it indicates that the tenon joint is not tight and the structure is not strong. Tables and tables can be shaken by hand to see if they are stable. You can sit on the sofa. If you move, it will creak. This is a nail job and won't take long.
Square tables, long tables, chairs, and other legs should have four triangular clips to fix them. When choosing, you can turn the tables and chairs over to take a look, and the cloth-covered chairs can be touched by hand.
3. Four-corner leveling
This point flashes by on the ground. Some hotel furniture only has three legs. See if the desktop is straight, you can't bend or tuck your waist. The desktop is convex, and the glass plate will rotate when placed; the desktop is concave, and the glass plate will break when pressed down. Pay attention to checking the cabinet doors. The gaps in the drawers should not be too large. Pay attention to the level and straightness, and the doors should not sag.
4. Veneer seams
Regardless of whether wood veneer, PVC, or pre-coated paper is pasted, pay attention to whether the leather pasting is smooth, whether there are bulges, bubbles, and uneven splicing.
When checking, you should look at the light. You can't see it without looking at the light. Ash veneer hotel furniture is relatively easily damaged and can only be used for two years. For wood veneer, planed veneer is better than rotary-cut veneer. The method to identify the two is to observe the wood pattern. The planed veneer has straight and dense grain, and the rotary-cut veneer has curved and sparse grain. For hotel furniture with particleboard veneer, the landing part needs to be sealed. If the edge is not sealed, the circuit board will absorb water, expand, and be damaged. Generally speaking, Professional hotel furniture factory The edges and corners of veneer hotel furniture are easily tilted upwards.
Keyword: Hotel Furniture
Professional hotel furniture factory
Follow Us
Contact Us
Fax: +86-757-26331008
Website: www.gdtongda.com / www.经典通达.cn
Address: Chayong Industrial Zone, Beijiao Town, Shunde District, Foshan City, Guangdong Province