Regardless of the standard Hotel furniture Its functional requirements and furniture composition are basically similar. It is not only necessary for sleeping and resting, but also for writing and storing small luggage.

　　 Hotel furniture Generally includes: standard room furniture, suite furniture and presidential suite furniture. The corresponding furniture generally includes: bedding, writing desk, luggage rack, TV cabinet, recliner, coffee table, bedside table, etc.

　　1. Hotel furniture Whether the materials are reasonable: The surface materials of different hotel furniture are different. For example, the legs of tables, chairs, and cabinets are made of hard miscellaneous materials, which are strong and can bear weight. The internal materials can use other materials; the thickness of the legs of the overcoat cabinet only needs to reach 2.5cm. If it is too thick, it will be awkward, and if it is too thin, it will easily bend and deform; kitchen and bathroom cabinets cannot use fiberboard, because fiberboard will expand and be damaged when it encounters water, so plywood should be used. The dining table should be made of waterproof materials.

　　2. Hotel furniture Whether the moisture content of the wood exceeds the standard: The moisture content of hotel furniture must not exceed 12%. If the moisture content is high, the wood is easy to warp and deform. Generally, consumers do not have testing instruments when purchasing, so they can touch the bottom of the furniture or the unpainted part inside with their hands. If it feels damp, the moisture content is at least more than 50%, and it cannot be used at all. Another method is to sprinkle a little water on the unpainted part of the furniture wood. If there is no waterlogging phenomenon or slow soaking, it indicates that the moisture content is high.

　　3. Whether the structure of hotel furniture is firm: Small furniture, such as chairs, stools, and clothes racks. It can be dragged on the cement floor and gently dropped. If the sound is crisp, the quality is good; if the sound is hoarse and there is a crackling sound, it means that the mortise and tenon joints are not tight and the structure is not firm. The desk and table can be shaken by hand to see if it is stable. You can sit on the sofa. After sitting down, gently move it, and it will creak. If it shakes, it means that the nails will work, and it won't last long. The legs of square tables, long tables, chairs, etc. should have four triangle clips to play a fixing role. When choosing, you can turn the tables and chairs over to have a look. You can touch the cloth-covered chair with your hand.

　　4. Whether the four legs of the hotel furniture are flat: This can be known by a flash of light on a flat ground. To see if the desktop is straight, you can use a piece of glass to test it. Don't hunchback or slump. If the desktop is convex, the glass you put on it will rotate; if the desktop is concave, the glass plate will break when pressed on it. The seams of the cabinet doors and drawers cannot be too large, they must be horizontal and vertical, and the doors cannot sag.

　　5. The tight seams of the veneer furniture of hotel furniture: Whether it is wood veneer, PVC or pre-coated paper, pay attention to whether the leather is flat, whether there are bulges, bubbles, loose seams. When checking, look at the light, otherwise you can't see it. Water elm veneer furniture is easily damaged and can only be used for two years. As for wood veneer, planed veneer is better than rotary-cut veneer. The method to distinguish between the two is to look at the wood grain. The wood grain of the flat-cut veneer is straight and dense, and the wood grain of the rotary-cut veneer is curved and sparse. For particleboard furniture, the landing part must be sealed, otherwise it will absorb moisture, expand, and be damaged. The corners of general veneer furniture are easy to warp. When choosing, you can use your hand to hold the corners. If you buckle it, it means there is a problem with the glue.

　　6. Appearance details and accessories of hotel furniture: Check the mirror furniture to see if the mirror is deformed or discolored, and check whether there is lining paper and backboard on the back of the mirror. The paint should be smooth, flat, without saliva, wrinkles and bumps. The corners cannot be straight, and straight edges are easy to chip and peel off paint. Whether the hardware accessories of the furniture are complete, standardized, and reasonable.

　　7. Hotel furniture is of high quality and wear-resistant. E1 grade environmentally friendly panels should be used for panels, and furniture materials should be fire-resistant and high-temperature resistant; purchased furniture should be waterproof and moisture-proof. Moreover, the furniture should have wear-resistant and durable quality, and choose products with high cost performance that can maintain a good appearance and quality for a long time.