Moisture-proof treatment

　　Solid wood furniture: timely ventilation and drying

　　Symptoms of dampness: excessively humid weather can cause small water droplets to appear on the surface of solid wood furniture, causing discoloration of the surface paint, and in severe cases, mildew. Increased moisture content in the wood leads to local volume expansion, ultimately causing furniture deformation. The parts where the wood is joined in the furniture may crack due to excessive changes in moisture content.

　　Moisture-proof maintenance: If the solid wood furniture does not show condensation or mildew, desiccant bags can be placed inside the furniture to absorb moisture. After wiping the exterior clean with a dry towel, apply a layer of walnut oil to prevent moisture. In addition, daily maintenance is also necessary. Solid wood furniture should be maintained with a special cleaning agent. Protective wax or a special cleaning agent can be evenly applied to the surface of the furniture and then gently wiped to maintain its luster and prevent moisture.

　　Dampness treatment: If solid wood furniture is damp, and the situation is not serious, it should be ventilated and dried in time; if condensation or mildew appears, the water droplets should be wiped dry first, the mildew removed with a mild cleaning agent, and then dehumidification should be carried out.

　　Note: When purchasing solid wood furniture, pay attention to the surface paint process. If the paint process is well covered, it can alleviate the dampness of solid wood furniture.

　　Panel furniture: keep the seams clean

　　Symptoms of dampness: Panel furniture is generally edge-banded and has better moisture resistance than solid wood. However, the joints of panel furniture may expand and deform due to increased moisture content, and in severe cases, the surface panels may crack.

　　Moisture-proof maintenance: Pay attention to keeping the seams clean to prevent dust and impurities from absorbing moisture and expanding, causing cracking. Good sealing measures should be taken in parts such as seams that are prone to water absorption.

　　Dampness treatment: On the first floor or in the basement, where the ground is relatively humid, moisture-proof mats should be placed under the panel furniture. After dampness, place desiccant bags to absorb moisture in time.

　　Note: When purchasing panel furniture, choose furniture with unexposed substrates, that is, furniture with better edge banding, to prevent the substrate from getting damp.

　　Upholstered furniture: do a good job of dust removal

　　Symptoms of dampness: In the initial stage, upholstered furniture will discolor and fade due to long-term dampness, and yellow spots or mildew may appear on the surface; subsequently, the damp fabric will lose elasticity, its tensile strength will decrease, and the volume of the fabric will increase. After the humid period, the upholstered fabric will become brittle, its wear resistance will be severely lost, and it will be easily damaged.

　　Moisture-proof maintenance: Upholstery easily accumulates dust, so regular dust removal should be done to prevent mildew in humid weather.

　　Dampness treatment: For ordinary upholstered sofas, if they are damp, they can be dried with a hair dryer or a dryer, but be sure to keep a certain distance between the hair dryer and the fabric surface. For upholstered sofas with more delicate and complex workmanship, it is best to use a special vacuum cleaner to remove all the dust from the surface.

　　Note: In humid weather, gently blow the sofa with a hair dryer to remove moisture inside the sofa. If you do not have the skills to do this yourself, or if the sofa has extensive mildew, it is best to ask a professional upholstered sofa cleaning team to solve the problem.

　　Leather furniture: wipe with a special protective oil

　　Symptoms of dampness: Leather furniture in a humid environment for a long time, the chemically treated leather surface is prone to color changes, and the leather becomes hard; in an environment with humidity exceeding 90%, mildew will also appear.

　　Moisture-proof maintenance: Before the hot and humid weather arrives, first use a soft damp cloth to remove dust, and then apply a layer of mink oil, sheep oil, leather oil, or other special protective oil for leather furniture to the surface. This not only has a moisture-proof effect but also protects the color of the leather furniture.

　　Dampness treatment: If mildew appears on the surface of leather furniture, use a mildew remover to remove the mildew and then apply leather care oil.

　　Note: If the area of mildew on the leather is large and the leather begins to harden, it is best to consult a professional for maintenance.

　　Wrought iron furniture: wipe with a dry cloth to absorb water

　　Symptoms of dampness: Wrought iron furniture will rust and rot due to increased moisture.

　　Moisture-proof maintenance: In humid weather, it is best to wipe this type of furniture with a dry cloth to absorb excess moisture.

　　Dampness treatment: If rust appears on the surface of wrought iron furniture, you can use a dishcloth or toothbrush dipped in rust remover to brush it off, and then wipe it with a dry cloth.

　　Note: Wrought iron furniture should not be placed near bathrooms, kitchens, and other places with high humidity. You can place desiccant bags near the wrought iron furniture to dehumidify.

　　Rattan furniture: do not put heavy pressure on it when it is damp

　　Symptoms of dampness: After long-term dampness, rattan furniture will turn black, and in severe cases, it will rot, and its toughness and firmness will also be significantly reduced.

　　Moisture-proof maintenance: If there is scale during use, it is best to wash it with salt water. This not only cleans but also makes the rattan softer and more elastic, ensuring the water absorption of the rattan.

　　Dampness treatment: Do not put heavy pressure on it when it is damp to ensure that its woven shape and gaps do not deform, ensuring that it shrinks back to its original shape after drying.

　　Note: Rattan furniture is generally not easy to get damp, and after humid weather, rattan furniture will return to its original shape and size.

　　 Moisture-proof tools

　　Dehumidifying bag: Activated carbon has a strong adsorption capacity. It can be wrapped in cloth bags or sacks and placed in various places indoors to keep the indoor air dry.

　　Coffee grounds: It has both moisture absorption and deodorization effects. Put it in a gauze bag, stocking, or cotton sock, and it becomes a convenient and easy-to-use small dehumidifying bag.

　　Dehumidifying box: A must-have for wardrobe dehumidification. It is a common dehumidifying product on the market, integrating dehumidification, fragrance, mildew resistance, and deodorization functions. Dehumidifying boxes are mostly used for wardrobe and shoe cabinet dehumidification. Simply place them in the cabinet when using them.

　　Plants: Snake plants and large-leaf plants can absorb excess moisture in the air, creating a small indoor air circulation system and maintaining the balance of indoor air. Use plants for dehumidification, and avoid choosing tropical plants.

　　Maintain Distance from the Ground

　　Furniture should not be in extensive contact with the ground. You can place some insulating materials under the four legs of the furniture to maintain a certain distance between the furniture and the ground, promoting ventilation and air circulation.

　　Open Windows Frequently for Ventilation

　　On sunny days, open windows frequently to ensure indoor air circulation. However, note that on humid days, do not open south-facing windows, as the south wind will bring moisture into the room, not only failing to dehumidify but also exacerbating indoor humidity. It is best not to open windows for ventilation on rainy days.

　　Regular Dehumidification

　　Regularly use a dehumidifier to adjust indoor humidity; generally, an indoor humidity of around 40%-60% is most suitable. If you do not have a dehumidifier installed, you can use the air conditioner more often to control indoor humidity.

　　Use Drying Tools

　　You can place moisture-proof agents, humidity absorption boxes, activated carbon, etc., in corners, under beds, and other locations to prevent moisture. Do not use overly damp, non-professional cleaning supplies to wipe furniture surfaces for extended periods.

　　Avoid Sun Exposure

　　Furniture moisture prevention cannot be solved by sun exposure. Direct sunlight or exposure to the sun will cause the furniture to deform and fade. In humid and hot weather, warm and humid air currents not only fail to dehumidify but will also worsen the dampness.